Browse all practice questions for the 360 Food Safety Manager Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

360 Food Safety Manager Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • For eggs that will be eaten immediately, what temperature and time should they be cooked to?
  • Why is maintenance of temperature measuring devices important and what practices support accuracy?
  • Which of the following describes a responsibility of the U.S. Food and Drug Administration (FDA)?
  • During transporting foods, what must be monitored continuously to prevent contamination?
  • What is the minimum internal cooking temperature and time recommended for fish and shellfish?
  • What is the steam temperature used for cleaning?
  • Shiga toxin-producing E. coli is associated with which serious outcome?
  • What is the final step in the cleaning and sanitizing process?
  • What freezing temperature range stops growth of microorganisms?
  • How are parasites defined?
  • What is the minimum temperature for using quaternary ammonium sanitizer?
  • Which temperature range defines refrigeration in cold preservation?
  • What best describes ultra high temperature (UHT) treatment?
  • Anisakis is a parasite with a life cycle involving what?
  • Which is a key feature of Norovirus transmission?
  • Which tools monitor CCPs and how should data be recorded?
  • Which factors are needed for many biological hazards to survive?
  • What is the difference between cleanliness and sanitation, and why are both necessary in a facility?
  • Which practice in HACCP is important for ensuring compliance with safety targets?
  • Which of the following is an example of chemical contamination?
  • Why is airflow control important in maintaining sanitary conditions in a kitchen?
  • How should raw animal products and ready-to-eat foods be stored in the cooler to prevent cross-contamination?
  • After identifying affected products in a recall, what must be done?
  • Which checks are part of proper receiving procedures?
  • What is the first stage in the cleaning and sanitizing process?
  • Which scenario best illustrates Cleaning-In-Place (CIP) cleaning?
  • Which practice is NOT a required personal hygiene practice?
  • How many chemicals are approved to use when cleaning according to the list?
  • How should the cooling process be documented?
  • Flatworms in food safety context are found in which foods as tapeworms or flukes?
  • What do spoilage bacteria do?
  • Which best defines risk in food safety?
  • Which of the following best defines a CCP?
  • Which combination constitutes sanitation?
  • What are pathogenic bacteria?
  • What activity helps ensure a HACCP plan is followed?
  • Which of the following are practical cross-contamination prevention strategies?
  • In HACCP terms, what does a monitoring procedure do?
  • Which statement describes natural toxins?
  • How should a food operation respond to a staff member reporting suspected illness?
  • In managing employee health, which practice protects worker confidentiality while screening for illness?
  • In a recall plan, which action is essential?
  • Which statement about acidity as a growth condition is true?
  • Which statement about freezing is true regarding parasites and bacteria?
  • HACCP covers hazards across which stages of the food supply chain?
  • Why must sanitizers have correct concentration and contact time?
  • What information should a temperature log capture and how should it be used to drive corrective actions?
  • How long do fridge items last compared to frozen items, and what storage practice is recommended?
  • Which of the following is an example of physical contamination?
  • A biological hazard is best described as which of the following?
  • Who should review CCP data daily and take corrective actions?
  • Which of the following is the second HACCP principle?
  • Parasites vary in size from which range?
  • Which approach helps prevent allergen cross-contact in a kitchen?
  • For cooling hot foods safely, what are the recommended target temperatures and timeframes?
  • What is the minimum duration for steam cleaning?
  • Which components are part of a Food Safety Management System and how do they interact?
  • Which are the three types of foodborne hazards?
  • During a recall, who should be notified as required by policy?
  • What temperature range defines the temperature danger zone where harmful organisms grow?
  • What range defines the danger zone for time-temperature control?
  • What is the minimum hot holding temperature for safety?
  • Which approach best describes how a recall drill should be conducted?
  • How should leftovers be handled after service in terms of labeling, storage temperature, and shelf life?
  • Which agency sets label standards and updates the food code?
  • What term describes items that carry hazards onto or into food?
  • Which is a common mistake in handwashing?
  • Which temperature is effective in killing E. coli in contaminated food?
  • What is a 'critical limit' and how is a 'monitoring procedure' used to enforce it?
  • What elements should be included on a label for stored leftovers to ensure safety?
  • E. coli can be found in:
  • Which of the following is part of safe reheating practice?
  • What design features of equipment support sanitation and ease of cleaning?
  • Which of the following is not a condition bacteria need to grow?
  • List common chemical hazards found in a kitchen and how to prevent them from contaminating foods.
  • Which statement best describes bacteria according to the material?
  • How does allergen management influence menu design and kitchen workflow?
  • How long should items be immersed when cleaning with water without chemical additives?
  • What is the minimum water temperature when cleaning with water without chemical additives?
  • Which statement accurately describes Salmonella?
  • Which setting is most associated with E. coli exposure in the examples listed?
  • Which item is a physical hazard in a food facility?
  • Which task is typically handled by state or local regulatory authorities?
  • What is thawing?
  • How does ongoing training contribute to food safety performance, and which methods effectively evaluate retention?
  • Which option correctly distinguishes physical hazards from biological hazards with kitchen examples?
  • What is the purpose of heat preservation?
  • Which of the following is NOT listed as a federal agency related to food safety in the material?
  • Which step comes third in the stages of cleaning and sanitizing?
  • What is the danger zone temperature range for perishable foods and the maximum time they may be kept in that range?
  • What is the range for dry storage temperatures?
  • Hepatitis A can be transmitted through:
  • Which statement best describes food defense and its protective measures?
  • Which statement best defines ready-to-eat food?
  • Which statement correctly describes iodine usage parameters?
  • Which organism is not listed among the five common foodborne illnesses described?
  • Which incubation period is typical for Salmonella?
  • What information should accompany each CCP reading?
  • Viruses are best described as what?
  • Why is cleaning performed before sanitizing on food-contact surfaces?
  • Pasteurization is best described as which process?
  • Norovirus is best described as:
  • When a contamination is detected and a recall is activated, which steps should be taken?
  • Shigella is primarily transmitted through:
  • What is the recommended internal temperature and rest practice for raw beef steaks, chops, or roasts?
  • Which statement correctly defines a hazard in food safety?
  • Which groups are commonly recognized as parasites?
  • Which description best fits mold growth on food?
  • Which statement best describes Hepatitis A transmission?
  • What is the sterilization process?
  • Which actions are essential to manage employee health and determine when to restrict someone from work?
  • Which is an example of time-temperature abuse?
  • What internal temperature should chicken, turkey, or other fowl reach to be considered safe?
  • What does SSOP stand for, and what elements should it include?
  • Can spoilage bacteria be detected by taste, appearance, or smell?
  • Which of the following is a common physical hazard in a kitchen?
  • Which practice reduces cross-contamination risk when receiving and storing ingredients?
  • How should allergen information be communicated to customers and what safeguards prevent cross-contact?
  • Which statement correctly describes thermometer calibration frequency and methods?
  • Which methods verify supplier safety compliance?
  • What is the FDA's two-stage cooling process for TCS foods?
  • Approximately how many people in the US get foodborne illnesses each year?
  • Which parameter is associated with quaternary ammonium sanitizers?
  • Which roundworm is associated with pork and can cause trichinosis?
  • What is the target internal temperature for mechanically injected or tenderized meat such as ground pork, veal, or lamb?
  • What effect can dehydration or overheating have on pathogenic contaminants?
  • Which option best describes a basic cleaning schedule for a small restaurant kitchen?
  • What should be done if clams, mussels, or oysters open during cooking?
  • Which statement describes proper thermometer calibration?
  • Which description best fits bacteria?
  • Which statement about labeling and sealing fridge items is correct?
  • Toxoplasma gondii is associated with which condition?
  • What action should be taken for a spoiled shipment?
  • Internal audits vs external audits in a Food Safety Management System; what is their purpose?
  • Which of the following are examples of hazards that require control in food service?
  • The pH must be what for iodine when used for cleaning?
  • Which components form a Pest Control Program and why is IPM preferred?
  • Which of the following is NOT a requirement for iodine usage?
  • When cooking shrimp and lobster, what color change indicates doneness?
  • Botulism is most commonly linked to which foods?
  • What is the target temperature range for the sanitizing rinse used for cleaning and sanitizing?
  • Identify at least three CCPs commonly found in a food service operation and explain why they are CCPs.
  • Which statement best describes the relationship between pH and microbial growth in foods?
  • In a recall, what is the role of documentation?
  • What sanitizing solution concentration is recommended for a three-compartment sink?
  • What is the iodine concentration range for cleaning?
  • Which statement about yeast is true?
  • Why is root-cause analysis important after a contamination event?
  • Which statement accurately contrasts Cleaning-In-Place (CIP) and Cleaning-Out-of-Place (COP) cleaning approaches?
  • What is the required concentration for quaternary ammonium sanitizer?
  • If eggs are not eaten right away, what temperature and time should they be cooked to?
  • When cooking fish, which description best matches proper doneness?
  • On food-contact surfaces, what is correct order and purpose?
  • What is the maximum storage duration for ready-to-eat foods?
  • The incubation period for Hepatitis A is typically:
  • Which statement correctly identifies the main cause of foodborne illness?
  • When reheating leftovers, to what temperature and duration should you reheat?
  • Which best defines biological contamination?
  • What is the purpose of Standard Sanitation Operating Procedures (SSOPs) in a kitchen?
  • What describes a recall log and what it should contain to be effective?
  • How should scallops appear when properly cooked?
  • Why is rapid cooling essential for foods with high microbial loads and what strategies facilitate it?
  • In program design, risk is used to do what?
  • How can shift-to-shift handoff affect food safety, and what tools help mitigate risk?
  • What is the purpose of tamper-evident packaging in food defense?
  • Which statement correctly differentiates HACCP validation from verification?
  • Which of the following is a HACCP step?
  • How do viruses commonly enter humans in the context of food safety?
  • During an inspection, it is expected that the establishment should?
  • In canning, what temperature and time are recommended to kill botulinum?
  • Which of the following describes common routes of parasite transmission?
  • Which item is NOT one of the seven HACCP steps?
  • During an inspection, what is the typical time frame to correct violations before potential closure?
  • What are the typical roles of a Food Safety Manager in audits, training, and corrective actions?
  • What is the minimum temperature for using iodine during cleaning?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy